Documentation
Introduction
- Overview
- Getting Started
- Support for K8s Installers
- Deploying on Kind
- Deploying on Minikube
- Configuration
- Installing with Helm
Cloud Deployment
Reference
- Antrea Network Policy
- Antctl
- Architecture
- Traffic Encryption (Ipsec / WireGuard)
- Securing Control Plane
- Security considerations
- Troubleshooting
- OS-specific Known Issues
- OVS Pipeline
- Feature Gates
- Antrea Proxy
- Network Flow Visibility
- Traceflow Guide
- NoEncap and Hybrid Traffic Modes
- Egress Guide
- NodePortLocal Guide
- Antrea IPAM Guide
- Exposing Services of type LoadBalancer
- Traffic Control
- Versioning
- Antrea API Groups
- Antrea API Reference
Windows
Integrations
Cookbooks
Multicluster
Developer Guide
Project Information
Antctl
antctl is the command-line tool for Antrea. At the moment, antctl supports running in three different modes:
- “controller mode”: when run out-of-cluster or from within the Antrea Controller Pod, antctl can connect to the Antrea Controller and query information from it (e.g. the set of computed NetworkPolicies).
- “agent mode”: when run from within an Antrea Agent Pod, antctl can connect to the Antrea Agent and query information local to that Agent (e.g. the set of computed NetworkPolicies received by that Agent from the Antrea Controller, as opposed to the entire set of computed policies).
- “flowaggregator mode”: when run from within a Flow Aggregator Pod, antctl can connect to the Flow Aggregator and query information from it (e.g. flow records related statistics).
Table of Contents
- Installation
-
Usage
- Showing or changing log verbosity level
- Showing feature gates status
- Collecting support information
- controllerinfo and agentinfo commands
- NetworkPolicy commands
- Dumping Pod network interface information
- Dumping OVS flows
- OVS packet tracing
- Traceflow
- Antctl Proxy
- Flow Aggregator commands
- Multi-cluster commands
- Multicast commands
- Showing memberlist state
- Upgrade existing objects of CRDs
Installation
The antctl binary is included in the Antrea Docker image
(antrea/antrea-ubuntu
) which means that there is no need to install anything
to connect to the Antrea Agent. Simply exec into the antrea-agent container for
the appropriate antrea-agent Pod and run antctl
:
kubectl exec -it ANTREA-AGENT_POD_NAME -n kube-system -c antrea-agent -- bash
> antctl help
Starting with Antrea release v0.5.0, we publish the antctl binaries for different OS / CPU Architecture combinations. Head to the releases page and download the appropriate one for your machine. For example:
On Mac & Linux:
curl -Lo ./antctl "https://github.com/antrea-io/antrea/releases/download/<TAG>/antctl-$(uname)-x86_64"
chmod +x ./antctl
mv ./antctl /some-dir-in-your-PATH/antctl
antctl version
For Linux, we also publish binaries for Arm-based systems.
On Windows, using PowerShell:
Invoke-WebRequest -Uri https://github.com/antrea-io/antrea/releases/download/<TAG>/antctl-windows-x86_64.exe -Outfile antctl.exe
Move-Item .\antctl.exe c:\some-dir-in-your-PATH\antctl.exe
antctl version
Usage
To see the list of available commands and options, run antctl help
. The list
will be different based on whether you are connecting to the Antrea Controller
or Agent.
When running out-of-cluster (“controller mode” only), antctl will look for your
kubeconfig file at $HOME/.kube/config
by default. You can select a different
one by setting the KUBECONFIG
environment variable or with --kubeconfig
(the latter taking precedence over the former).
The following sub-sections introduce a few commands which are useful for troubleshooting the Antrea system.
Showing or changing log verbosity level
Starting from version 0.10.0, Antrea supports showing or changing the log
verbosity level of Antrea Controller or Antrea Agent using the antctl log-level
command. Starting from version 1.5, Antrea supports showing or changing the
log verbosity level of the Flow Aggregator using the antctl log-level
command.
The command can only run locally inside the antrea-controller
, antrea-agent
or flow-aggregator
container.
The following command prints the current log verbosity level:
antctl log-level
This command updates the log verbosity level (the LEVEL
argument must be an
integer):
antctl log-level LEVEL
Showing feature gates status
The feature gates of Antrea Controller and Agent can be shown using the antctl get featuregates
command.
The command can run locally inside the antrea-controller
or antrea-agent
container or out-of-cluster,
when it is running out-of-cluster or in Controller Pod, it will print both Controller and Agent’s feature gates list.
The following command prints the current feature gates:
antctl get featuregates
Collecting support information
Starting with version 0.7.0, Antrea supports the antctl supportbundle
command,
which can collect information from the cluster, the Antrea Controller and all
Antrea agents. This information is useful when trying to troubleshoot issues in
Kubernetes clusters using Antrea. In particular, when running the command
out-of-cluster, all the information can be collected under one single directory,
which you can upload and share when reporting issues on Github. Simply run the
command as follows:
antctl supportbundle [-d TARGET_DIR]
If you omit to provide a directory, antctl will create one in the current
working directory, using the current timestamp as a suffix. The command also
provides additional flags to filter the results: run antctl supportbundle --help
for the full list.
The collected support bundle will include the following (more information may be included over time):
- cluster information: description of the different K8s resources in the cluster (Nodes, Deployments, etc.).
- Antrea Controller information: all the available logs (contents will vary based on the verbosity selected when running the controller) and state stored at the controller (e.g. computed NetworkPolicy objects).
- Antrea Agent information: all the available logs from the agent and the OVS daemons, network configuration of the Node (e.g. routes, iptables rules, OVS flows) and state stored at the agent (e.g. computed NetworkPolicy objects received from the controller).
Be aware that the generated support bundle includes a lot of information, including logs, so please review the contents of the directory before sharing it on Github and ensure that you do not share anything sensitive.
The antctl supportbundle
command can also be run inside a Controller or Agent
Pod, in which case only local information will be collected.
Since v1.10.0, Antrea also supports collecting information by applying a
SupportBundleCollection
CRD, you can refer to the
support bundle guide
for more information.
controllerinfo and agentinfo commands
antctl
controller command get controllerinfo
(or get ci
) and agent command
get agentinfo
(or get ai
) print the runtime information of
antrea-controller
and antrea-agent
respectively.
antctl get controllerinfo
antctl get agentinfo
NetworkPolicy commands
Both Antrea Controller and Agent support querying the NetworkPolicy objects in the Antrea control plane API. The source of a control plane NetworkPolicy is the original policy resource (K8s NetworkPolicy, Antrea-native Policy or AdminNetworkPolicy) from which the control plane NetworkPolicy was derived.
antctl
get networkpolicy
(orget netpol
) command can print all NetworkPolicies, a specified NetworkPolicy, or NetworkPolicies in a specified Namespace.get appliedtogroup
(orget atg
) command can print all NetworkPolicy AppliedToGroups (AppliedToGroup includes the Pods to which a NetworkPolicy is applied), or a specified AppliedToGroup.get addressgroup
(orget ag
) command can print all NetworkPolicy AddressGroups (AddressGroup defines source or destination addresses of NetworkPolicy rules), or a specified AddressGroup.
Using the json
or yaml
antctl output format can print more information of
NetworkPolicy, AppliedToGroup, and AddressGroup, than using the default table
output format. The NAME
of a control plane NetworkPolicy is the UID of its source
NetworkPolicy.
antctl get networkpolicy [NAME] [-n NAMESPACE] [-o yaml]
antctl get appliedtogroup [NAME] [-o yaml]
antctl get addressgroup [NAME] [-o yaml]
NetworkPolicy, AppliedToGroup, and AddressGroup also support sort-by=''
option,
which can be used to sort these resources on the basis of a particular field. Any
valid json path can be passed as flag value. If no value is passed it will use a
default field to sort results. For NetworkPolicy, the default field is the name of
the source NetworkPolicy. For AppliedToGroup and AddressGroup, the default field is
the object name (which is a generated UUID).
antctl get networkpolicy --sort-by='.sourceRef.name'
antctl get appliedtogroup --sort-by='.metadata.name'
antctl get addressgroup --sort-by='.metadata.name'
NetworkPolicy also supports sort-by=effectivePriority
option, which can be used to
view the effective order in which the NetworkPolicies are evaluated. Antrea-native
NetworkPolicy ordering is documented
here.
antctl get networkpolicy --sort-by=effectivePriority
Antrea Agent supports some extra antctl
commands.
-
Printing NetworkPolicies applied to a specific local Pod.
antctl get networkpolicy -p POD -n NAMESPACE
-
Printing NetworkPolicies with a specific source NetworkPolicy type.
antctl get networkpolicy -T (K8sNP|ACNP|ANNP|ANP)
-
Printing NetworkPolicies with a specific source NetworkPolicy name.
antctl get networkpolicy -S SOURCE_NAME [-n NAMESPACE]
Mapping endpoints to NetworkPolicies
antctl
supports mapping a specific Pod to the NetworkPolicies which “select”
this Pod, either because they apply to the Pod directly or because one of their
policy rules selects the Pod.
antctl query endpoint -p POD [-n NAMESPACE]
If no Namespace is provided with -n
, the command will default to the “default”
Namespace.
This command only works in “controller mode” and as of now it can only be run from inside the Antrea Controller Pod, and not from out-of-cluster.
Dumping Pod network interface information
antctl
agent command get podinterface
(or get pi
) can dump network
interface information of all local Pods, or a specified local Pod, or local Pods
in the specified Namespace, or local Pods matching the specified Pod name.
antctl get podinterface [NAME] [-n NAMESPACE]
Dumping OVS flows
Starting from version 0.6.0, Antrea Agent supports dumping Antrea OVS flows. The
antctl
get ovsflows
(or get of
) command can dump all OVS flows, flows
added for a specified Pod, or flows added for Service load-balancing of a
specified Service, or flows added to realize a specified NetworkPolicy, or flows
in the specified OVS flow tables, or all or the specified OVS groups.
antctl get ovsflows
antctl get ovsflows -p POD -n NAMESPACE
antctl get ovsflows -S SERVICE -n NAMESPACE
antctl get ovsflows -N NETWORKPOLICY -n NAMESPACE
antctl get ovsflows -T TABLE_A,TABLE_B
antctl get ovsflows -T TABLE_A,TABLE_B_NUM
antctl get ovsflows -G all
antctl get ovsflows -G GROUP_ID1,GROUP_ID2
OVS flow tables can be specified using table names, or the table numbers.
antctl get ovsflow --help
lists all Antrea flow tables. For more information
about Antrea OVS pipeline and flows, please refer to the
OVS pipeline doc.
Example outputs of dumping Pod and NetworkPolicy OVS flows:
# Dump OVS flows of Pod "coredns-6955765f44-zcbwj"
$ antctl get of -p coredns-6955765f44-zcbwj -n kube-system
FLOW
table=classification, n_packets=513122, n_bytes=42615080, priority=190,in_port="coredns--d0c58e" actions=set_field:0x2/0xffff->reg0,resubmit(,10)
table=10, n_packets=513122, n_bytes=42615080, priority=200,ip,in_port="coredns--d0c58e",dl_src=52:bd:c6:e0:eb:c1,nw_src=172.100.1.7 actions=resubmit(,30)
table=10, n_packets=0, n_bytes=0, priority=200,arp,in_port="coredns--d0c58e",arp_spa=172.100.1.7,arp_sha=52:bd:c6:e0:eb:c1 actions=resubmit(,20)
table=80, n_packets=556468, n_bytes=166477824, priority=200,dl_dst=52:bd:c6:e0:eb:c1 actions=load:0x5->NXM_NX_REG1[],set_field:0x10000/0x10000->reg0,resubmit(,90)
table=70, n_packets=0, n_bytes=0, priority=200,ip,dl_dst=aa:bb:cc:dd:ee:ff,nw_dst=172.100.1.7 actions=set_field:62:39:b4:e8:05:76->eth_src,set_field:52:bd:c6:e0:eb:c1->eth_dst,dec_ttl,resubmit(,80)
# Get NetworkPolicies applied to Pod "coredns-6955765f44-zcbwj"
$ antctl get netpol -p coredns-6955765f44-zcbwj -n kube-system
NAMESPACE NAME APPLIED-TO RULES
kube-system kube-dns 160ea6d7-0234-5d1d-8ea0-b703d0aa3b46 1
# Dump OVS flows of NetworkPolicy "kube-dns"
$ antctl get of -N kube-dns -n kube-system
FLOW
table=90, n_packets=0, n_bytes=0, priority=190,conj_id=1,ip actions=resubmit(,105)
table=90, n_packets=0, n_bytes=0, priority=200,ip actions=conjunction(1,1/3)
table=90, n_packets=0, n_bytes=0, priority=200,ip,reg1=0x5 actions=conjunction(2,2/3),conjunction(1,2/3)
table=90, n_packets=0, n_bytes=0, priority=200,udp,tp_dst=53 actions=conjunction(1,3/3)
table=90, n_packets=0, n_bytes=0, priority=200,tcp,tp_dst=53 actions=conjunction(1,3/3)
table=90, n_packets=0, n_bytes=0, priority=200,tcp,tp_dst=9153 actions=conjunction(1,3/3)
table=100, n_packets=0, n_bytes=0, priority=200,ip,reg1=0x5 actions=drop
OVS packet tracing
Starting from version 0.7.0, Antrea Agent supports tracing the OVS flows that a specified packet traverses, leveraging the OVS packet tracing tool.
antctl trace-packet
command starts a packet tracing operation.
antctl help trace-packet
shows the usage of the command. This section lists a
few trace-packet command examples.
# Trace an IP packet between two Pods
antctl trace-packet -S ns1/pod1 -D ns2/pod2
# Trace a Service request from a local Pod
antctl trace-packet -S ns1/pod1 -D ns2/svc2 -f "tcp,tcp_dst=80"
# Trace the Service reply packet (assuming "ns2/pod2" is the Service backend Pod)
antctl trace-packet -D ns1/pod1 -S ns2/pod2 -f "tcp,tcp_src=80"
# Trace an IP packet from a Pod to gateway port
antctl trace-packet -S ns1/pod1 -D antrea-gw0
# Trace a UDP packet from a Pod to an IP address
antctl trace-packet -S ns1/pod1 -D 10.1.2.3 -f udp,udp_dst=1234
# Trace a UDP packet from an IP address to a Pod
antctl trace-packet -D ns1/pod1 -S 10.1.2.3 -f udp,udp_src=1234
# Trace an ARP request from a local Pod
antctl trace-packet -p ns1/pod1 -f arp,arp_spa=10.1.2.3,arp_sha=00:11:22:33:44:55,arp_tpa=10.1.2.1,dl_dst=ff:ff:ff:ff:ff:ff
Example outputs of tracing a UDP (DNS request) packet from a remote Pod to a local (coredns) Pod:
$ antctl trace-packet -S default/web-client -D kube-system/coredns-6955765f44-zcbwj -f udp,udp_dst=53
result: |
Flow: udp,in_port=1,vlan_tci=0x0000,dl_src=aa:bb:cc:dd:ee:ff,dl_dst=aa:bb:cc:dd:ee:ff,nw_src=172.100.2.11,nw_dst=172.100.1.7,nw_tos=0,nw_ecn=0,nw_ttl=64,tp_src=0,tp_dst=53
bridge("br-int")
----------------
0. in_port=1, priority 200, cookie 0x5e000000000000
load:0->NXM_NX_REG0[0..15]
resubmit(,30)
30. ip, priority 200, cookie 0x5e000000000000
ct(table=31,zone=65520)
drop
-> A clone of the packet is forked to recirculate. The forked pipeline will be resumed at table 31.
-> Sets the packet to an untracked state, and clears all the conntrack fields.
Final flow: unchanged
Megaflow: recirc_id=0,eth,udp,in_port=1,nw_frag=no,tp_src=0x0/0xfc00
Datapath actions: ct(zone=65520),recirc(0x53)
===============================================================================
recirc(0x53) - resume conntrack with default ct_state=trk|new (use --ct-next to customize)
===============================================================================
Flow: recirc_id=0x53,ct_state=new|trk,ct_zone=65520,eth,udp,in_port=1,vlan_tci=0x0000,dl_src=aa:bb:cc:dd:ee:ff,dl_dst=aa:bb:cc:dd:ee:ff,nw_src=172.100.2.11,nw_dst=172.100.1.7,nw_tos=0,nw_ecn=0,nw_ttl=64,tp_src=0,tp_dst=53
bridge("br-int")
----------------
thaw
Resuming from table 31
31. priority 0, cookie 0x5e000000000000
resubmit(,40)
40. priority 0, cookie 0x5e000000000000
resubmit(,50)
50. priority 0, cookie 0x5e000000000000
resubmit(,60)
60. priority 0, cookie 0x5e000000000000
resubmit(,70)
70. ip,dl_dst=aa:bb:cc:dd:ee:ff,nw_dst=172.100.1.7, priority 200, cookie 0x5e030000000000
set_field:62:39:b4:e8:05:76->eth_src
set_field:52:bd:c6:e0:eb:c1->eth_dst
dec_ttl
resubmit(,80)
80. dl_dst=52:bd:c6:e0:eb:c1, priority 200, cookie 0x5e030000000000
set_field:0x5->reg1
set_field:0x10000/0x10000->reg0
resubmit(,90)
90. conj_id=2,ip, priority 190, cookie 0x5e050000000000
resubmit(,105)
105. ct_state=+new+trk,ip, priority 190, cookie 0x5e000000000000
ct(commit,table=110,zone=65520)
drop
-> A clone of the packet is forked to recirculate. The forked pipeline will be resumed at table 110.
-> Sets the packet to an untracked state, and clears all the conntrack fields.
Final flow: recirc_id=0x53,eth,udp,reg0=0x10000,reg1=0x5,in_port=1,vlan_tci=0x0000,dl_src=62:39:b4:e8:05:76,dl_dst=52:bd:c6:e0:eb:c1,nw_src=172.100.2.11,nw_dst=172.100.1.7,nw_tos=0,nw_ecn=0,nw_ttl=63,tp_src=0,tp_dst=53
Megaflow: recirc_id=0x53,ct_state=+new-est-inv+trk,ct_mark=0,eth,udp,in_port=1,dl_src=aa:bb:cc:dd:ee:ff,dl_dst=aa:bb:cc:dd:ee:ff,nw_src=192.0.0.0/2,nw_dst=172.100.1.7,nw_ttl=64,nw_frag=no,tp_dst=53
Datapath actions: set(eth(src=62:39:b4:e8:05:76,dst=52:bd:c6:e0:eb:c1)),set(ipv4(ttl=63)),ct(commit,zone=65520),recirc(0x54)
===============================================================================
recirc(0x54) - resume conntrack with default ct_state=trk|new (use --ct-next to customize)
===============================================================================
Flow: recirc_id=0x54,ct_state=new|trk,ct_zone=65520,eth,udp,reg0=0x10000,reg1=0x5,in_port=1,vlan_tci=0x0000,dl_src=62:39:b4:e8:05:76,dl_dst=52:bd:c6:e0:eb:c1,nw_src=172.100.2.11,nw_dst=172.100.1.7,nw_tos=0,nw_ecn=0,nw_ttl=63,tp_src=0,tp_dst=53
bridge("br-int")
----------------
thaw
Resuming from table 110
110. ip,reg0=0x10000/0x10000, priority 200, cookie 0x5e000000000000
output:NXM_NX_REG1[]
-> output port is 5
Final flow: unchanged
Megaflow: recirc_id=0x54,eth,ip,in_port=1,nw_frag=no
Datapath actions: 3
Traceflow
antctl traceflow
(or antctl tf
) command is used to start a Traceflow and
retrieve its result. After the result is collected, the Traceflow will be
deleted. Users can also create a Traceflow with kubectl
, but antctl traceflow
offers a simpler way. For more information about Traceflow, refer to the
Traceflow guide.
To start a regular Traceflow, both --source
(or -S
) and --destination
(or
-D
) arguments must be specified, and the source must be a Pod. For example:
$ antctl tf -S busybox0 -D busybox1
name: busybox0-to-busybox1-fpllngzi
phase: Succeeded
source: default/busybox0
destination: default/busybox1
results:
- node: antrea-linux-testbed7-1
timestamp: 1596435607
observations:
- component: SpoofGuard
action: Forwarded
- component: Forwarding
componentInfo: Output
action: Delivered
To start a live-traffic Traceflow, add the --live-traffic
(or -L
) flag. Add
the --dropped-only
flag to indicate only the packet dropped by a NetworkPolicy
should be captured in the live-traffic Traceflow. A live-traffic Traceflow
just requires one of --source
and --destination
arguments to be specified,
and at least one of them must be a Pod.
The --flow
(or -f
) argument can be used to specify the Traceflow packet
headers with the
ovs-ofctl
flow syntax. The supported flow fields include: IP family (ipv6
to indicate an
IPv6 packet), IP protocol (icmp
, icmpv6
, tcp
, udp
), source and
destination ports (tcp_src
, tcp_dst
, udp_src
, udp_dst
), and TCP flags
(tcp_flags
).
By default, the command will wait for the Traceflow to succeed or fail, or
timeout. The default timeout is 10 seconds, but can be changed with the
--timeout
(or -t
) argument. Add the --no-wait
flag to start a Traceflow
without waiting for its results. In this case, the command will not delete the
Traceflow resource. The traceflow
command supports yaml and json output.
More examples of antctl traceflow
:
# Start a Traceflow from pod1 to pod2, both Pods are in Namespace default
$ antctl traceflow -S pod1 -D pod2
# Start a Traceflow from pod1 in Namepace ns1 to a destination IP
$ antctl traceflow -S ns1/pod1 -D 123.123.123.123
# Start a Traceflow from pod1 to Service svc1 in Namespace ns1
$ antctl traceflow -S pod1 -D ns1/svc1 -f tcp,tcp_dst=80
# Start a Traceflow from pod1 to pod2, with a UDP packet to destination port 1234
$ antctl traceflow -S pod1 -D pod2 -f udp,udp_dst=1234
# Start a Traceflow for live TCP traffic from pod1 to svc1, with 1 minute timeout
$ antctl traceflow -S pod1 -D svc1 -f tcp --live-traffic -t 1m
# Start a Traceflow to capture the first dropped TCP packet to pod1 on port 80, within 10 minutes
$ antctl traceflow -D pod1 -f tcp,tcp_dst=80 --live-traffic --dropped-only -t 10m
Antctl Proxy
antctl can run as a reverse proxy for the Antrea API (Controller or arbitrary
Agent). Usage is very similar to kubectl proxy
and the implementation is
essentially the same.
To run a reverse proxy for the Antrea Controller API, use:
antctl proxy --controller
To run a reverse proxy for the Antrea Agent API for the antrea-agent Pod running on Node <TARGET_NODE>, use:
antctl proxy --agent-node
You can then access the API at 127.0.0.1:8001
. To implement this
functionality, antctl retrieves the Node IP address and API server port for the
Antrea Controller or for the specified Agent from the K8s API, and it proxies
all the requests received on 127.0.0.1:8001
directly to that IP / port. One
thing to keep in mind is that the TLS connection between the proxy and the
Antrea Agent or Controller will not be secure (no certificate verification), and
the proxy should be used for debugging only.
To see the full list of supported options, run antctl proxy --help
.
This feature is useful if one wants to use the Go pprof tool to collect runtime profiling data about the Antrea components. Please refer to this document for more information.
Flow Aggregator commands
antctl supports dumping the flow records handled by the Flow Aggregator, and printing metrics about flow record processing. These commands are only available when you exec into the Flow Aggregator Pod.
Dumping flow records
antctl supports dumping flow records stored in the Flow Aggregator. The
antctl get flowrecords
command can dump all matching flow records. It supports
the 5-tuple flow key or a subset of the 5-tuple as a filter. A 5-tuple flow key
contains Source IP, Destination IP, Source Port, Destination Port and Transport
Protocol. If the filter is empty, all flow records will be dumped.
The command provides a compact display of the flow records in the default table
output format, which contains the flow key, source pod name, destination pod name,
source pod namespace, destination pod namespace and destination service name for
each flow record. Using the json
or yaml
antctl output format will include
output flow record information in a structured format, and will include more
information about each flow record. antctl get flowrecords --help
shows the
usage of the command. This section lists a few dumping flow records command
examples.
# Get the list of all flow records
antctl get flowrecords
# Get the list of flow records with a complete filter and output in json format
antctl get flowrecords --srcip 10.0.0.1 --dstip 10.0.0.2 --proto 6 --srcport 1234 --dstport 5678 -o json
# Get the list of flow records with a partial filter, e.g. source address and source port
antctl get flowrecords --srcip 10.0.0.1 --srcport 1234
Example outputs of dumping flow records:
$ antctl get flowrecords --srcip 10.10.1.4 --dstip 10.10.0.2
SRC_IP DST_IP SPORT DPORT PROTO SRC_POD DST_POD SRC_NS DST_NS SERVICE
10.10.1.4 10.10.0.2 38581 53 17 flow-aggregator-67dc8ddfc8-zx8sg coredns-78fcd69978-7vc6k flow-aggregator kube-system kube-system/kube-dns:dns
10.10.1.4 10.10.0.2 56505 53 17 flow-aggregator-67dc8ddfc8-zx8sg coredns-78fcd69978-7vc6k flow-aggregator kube-system kube-system/kube-dns:dns
$ antctl get flowrecords --srcip 10.10.0.1 --srcport 50497 -o json
[
{
"destinationClusterIPv4": "0.0.0.0",
"destinationIPv4Address": "10.10.1.2",
"destinationNodeName": "k8s-node-worker-1",
"destinationPodName": "coredns-78fcd69978-x2twv",
"destinationPodNamespace": "kube-system",
"destinationServicePort": 0,
"destinationServicePortName": "",
"destinationTransportPort": 53,
"egressNetworkPolicyName": "",
"egressNetworkPolicyNamespace": "",
"egressNetworkPolicyRuleAction": 0,
"egressNetworkPolicyRuleName": "",
"egressNetworkPolicyType": 0,
"flowEndReason": 3,
"flowEndSeconds": 1635546893,
"flowStartSeconds": 1635546867,
"flowType": 2,
"ingressNetworkPolicyName": "",
"ingressNetworkPolicyNamespace": "",
"ingressNetworkPolicyRuleAction": 0,
"ingressNetworkPolicyRuleName": "",
"ingressNetworkPolicyType": 0,
"octetDeltaCount": 99,
"octetDeltaCountFromDestinationNode": 99,
"octetDeltaCountFromSourceNode": 0,
"octetTotalCount": 99,
"octetTotalCountFromDestinationNode": 99,
"octetTotalCountFromSourceNode": 0,
"packetDeltaCount": 1,
"packetDeltaCountFromDestinationNode": 1,
"packetDeltaCountFromSourceNode": 0,
"packetTotalCount": 1,
"packetTotalCountFromDestinationNode": 1,
"packetTotalCountFromSourceNode": 0,
"protocolIdentifier": 17,
"reverseOctetDeltaCount": 192,
"reverseOctetDeltaCountFromDestinationNode": 192,
"reverseOctetDeltaCountFromSourceNode": 0,
"reverseOctetTotalCount": 192,
"reverseOctetTotalCountFromDestinationNode": 192,
"reverseOctetTotalCountFromSourceNode": 0,
"reversePacketDeltaCount": 1,
"reversePacketDeltaCountFromDestinationNode": 1,
"reversePacketDeltaCountFromSourceNode": 0,
"reversePacketTotalCount": 1,
"reversePacketTotalCountFromDestinationNode": 1,
"reversePacketTotalCountFromSourceNode": 0,
"sourceIPv4Address": "10.10.0.1",
"sourceNodeName": "",
"sourcePodName": "",
"sourcePodNamespace": "",
"sourceTransportPort": 50497,
"tcpState": ""
}
]
Record metrics
Flow Aggregator supports printing record metrics. The antctl get recordmetrics
command can print all metrics related to the Flow Aggregator. The metrics include
the following:
- number of records received by the collector process in the Flow Aggregator
- number of records exported by the Flow Aggregator
- number of active flows that are being tracked
- number of exporters connected to the Flow Aggregator
Example outputs of record metrics:
RECORDS-EXPORTED RECORDS-RECEIVED FLOWS EXPORTERS-CONNECTED
46 118 7 2
Multi-cluster commands
For information about Antrea Multi-cluster commands, please refer to the antctl Multi-cluster commands.
Multicast commands
The antctl get podmulticaststats [POD_NAME] [-n NAMESPACE]
command prints inbound
and outbound multicast statistics for each Pod. Note that IGMP packets are not counted.
Example output of podmulticaststats:
$ antctl get podmulticaststats
NAMESPACE NAME INBOUND OUTBOUND
testmulticast-vw7gx5b9 test3-receiver-2 30 0
testmulticast-vw7gx5b9 test3-sender-1 0 10
Showing memberlist state
antctl
agent command get memberlist
(or get ml
) prints the state of memberlist
cluster of Antrea Agent.
$ antctl get memberlist
NODE IP STATUS
worker1 172.18.0.4 Alive
worker2 172.18.0.3 Alive
worker3 172.18.0.2 Dead
Upgrade existing objects of CRDs
antctl supports upgrading existing objects of Antrea CRDs to the storage version. The related sub-commands should be run out-of-cluster. Please ensure that the kubeconfig file used by antctl has the necessary permissions. The required permissions are listed in the following sample ClusterRole.
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
name: antctl
rules:
- apiGroups:
- apiextensions.k8s.io
resources:
- customresourcedefinitions
verbs:
- get
- list
- apiGroups:
- apiextensions.k8s.io
resources:
- customresourcedefinitions/status
verbs:
- update
- apiGroups:
- crd.antrea.io
resources:
- "*"
verbs:
- get
- list
- update
This command performs a dry-run to upgrade all existing objects of Antrea CRDs to the storage version:
antctl upgrade api-storage --dry-run
This command upgrades all existing objects of Antrea CRDs to the storage version:
antctl upgrade api-storage
This command upgrades existing AntreaAgentInfo objects to the storage version:
antctl upgrade api-storage --crds=antreaagentinfos.crd.antrea.io
This command upgrades existing Egress and Group objects to the storage version:
antctl upgrade api-storage --crds=egresses.crd.antrea.io,groups.crd.antrea.io
If you encounter any errors related to permissions while running the commands, double-check the permissions of the kubeconfig used by antctl. Ensure that the ClusterRole has the required permissions. The following sample errors are caused by insufficient permissions:
Error: failed to get CRD list: customresourcedefinitions.apiextensions.k8s.io is forbidden: User "user" cannot list resource "customresourcedefinitions" in API group "apiextensions.k8s.io" at the cluster scope
Error: externalippools.crd.antrea.io is forbidden: User "user" cannot list resource "externalippools" in API group "crd.antrea.io" at the cluster scope
Error: error upgrading object prod-external-ip-pool of CRD "externalippools.crd.antrea.io": externalippools.crd.antrea.io "prod-external-ip-pool" is forbidden: User "user" cannot update resource "externalippools" in API group "crd.antrea.io" at the cluster scope
Error: error updating CRD "externalippools.crd.antrea.io" status.storedVersion: customresourcedefinitions.apiextensions.k8s.io "externalippools.crd.antrea.io" is forbidden: User "user" cannot update resource "customresourcedefinitions/status" in API group "apiextensions.k8s.io" at the cluster scope