Logo

Documentation

Antrea Multi-cluster Quick Start

In this quick start guide, we will set up an Antrea Multi-cluster ClusterSet with two clusters. One cluster will serve as the leader of the ClusterSet, and meanwhile also join as a member cluster; another cluster will be a member only.

The diagram below shows the two clusters and the ClusterSet to be created (for simplicity, the diagram just shows two Nodes for each cluster).

Antrea Multi-cluster Example ClusterSet

Preparation

We assume an Antrea version >= v1.7.0 is used in this guide, and the Antrea version is set to an environment variable TAG. For example, the following command sets the Antrea version to v1.7.0.

export TAG=v1.7.0

To use the latest version of Antrea Multi-cluster from the Antrea main branch, you can change the YAML manifest path to: https://github.com/antrea-io/antrea/tree/main/multicluster/build/yamls/ when applying or downloading an Antrea YAML manifest.

Antrea must be deployed in both cluster A and cluster B, and the Multicluster feature of antrea-agent must be enabled to support multi-cluster Services. The two clusters must have non-overlapping Service CIDRs. Set the following configuration parameters in antrea-agent.conf of the Antrea deployment manifest to enable the Multicluster feature:

antrea-agent.conf: |
...
  featureGates:
...
    Multicluster: true
...
  multicluster:
    enable: true
    namespace: ""

At the moment, Multi-cluster Gateway only works with the Antrea encap traffic mode, and all member clusters in a ClusterSet must use the same tunnel type.

Set up Leader and Member in Cluster A

Step 1 - deploy Antrea Multi-cluster Controllers for leader and member

Run the following commands to deploy Multi-cluster Controller for the leader into Namespace antrea-multicluster (Namespace antrea-multicluster will be created by the commands), and Multi-cluster Controller for the member into Namepsace kube-system.

$kubectl apply -f https://github.com/antrea-io/antrea/releases/download/$TAG/antrea-multicluster-leader-global.yml
$kubectl create ns antrea-multicluster
$kubectl apply -f https://github.com/antrea-io/antrea/releases/download/$TAG/antrea-multicluster-leader-namespaced.yml > antrea-multicluster-leader-namespaced.yml
$kubectl apply -f https://github.com/antrea-io/antrea/releases/download/$TAG/antrea-multicluster-member.yml

You can run the following command to verify the the leader and member antrea-mc-controller Pods are deployed and running:

$kubectl get all -A -l="component=antrea-mc-controller"
NAMESPACE             NAME                                        READY   STATUS    RESTARTS   AGE
antrea-multicluster   pod/antrea-mc-controller-cd7bf8f68-kh4kz    1/1     Running   0          50s
kube-system           pod/antrea-mc-controller-85dbf58b75-pjj48   1/1     Running   0          48s

NAMESPACE             NAME                                   READY   UP-TO-DATE   AVAILABLE   AGE
antrea-multicluster   deployment.apps/antrea-mc-controller   1/1     1            1           50s
kube-system           deployment.apps/antrea-mc-controller   1/1     1            1           48s

Step 2 - initialize ClusterSet

Antrea provides several template YAML manifests to set up a ClusterSet quicker. You can run the following commands that use the template manifests to create a ClusterSet named test-clusteraset in the leader cluster and get a ServiceAccount token for the member clusters (both cluster A and B in our case) to access the leader cluster (cluster A in our case) apiserver.

$kubectl apply -f https://raw.githubusercontent.com/antrea-io/antrea/$TAG/multicluster/config/samples/clusterset_init/multicluster_clusterset_template.yaml
$kubectl apply -f  https://raw.githubusercontent.com/antrea-io/antrea/$TAG/multicluster/config/samples/clusterset_init/multicluster_leader_access_token_template.yaml
$kubectl get secret leader-access-token -n antrea-multicluster -o yaml | grep -w -e '^apiVersion' -e '^data' -e '^metadata' -e '^ *name:'  -e   '^kind' -e '  ca.crt' -e '  token:' -e '^type' -e '  namespace' | sed -e 's/kubernetes.io\/service-account-token/Opaque/g' -e 's/antrea-multicluster/kube-system/g' >  leader-access-token.yml

The last command saves the ServiceAccount token to leader-access-token.yml which will be needed for member clusters to join the ClusterSet. Note, in this guide, we use a shared default ServiceAccount antrea-mc-member-access-sa for all member clusters. If you want to create a separate ServiceAccount for each member cluster for security considerations, you can follow the instructions in the Multi-cluster User Guide.

Next, run the following commands to make cluster A join the ClusterSet also as a member:

$kubectl apply -f leader-access-token.yml
$curl -L https://raw.githubusercontent.com/antrea-io/antrea/v1.7.0/multicluster/config/samples/clusterset_init/multicluster_membercluster_template.yaml  > multicluster_membercluster.yaml
$sed -e 's/test-cluster-member/test-cluster-leader/g' -e 's/<LEADER_CLUSTER_IP>/172.10.0.11/g' multicluster_membercluster.yaml | kubectl apply -f -

Here, 172.10.0.11 is the kube-apiserver IP of cluster A. You should replace it with the kube-apiserver IP of your leader cluster.

Step 3 - specify Multi-cluster Gateway Node

Last, you need to choose a Node in cluster A to serve as the Multi-cluster Gateway. The Node should have an IP that is reachable from the cluster B’s Gateway Node, so a tunnel can be created between the two Gateways. For more information about Multi-cluster Gatweay, please refer to the Multi-cluster User Guide.

Assuming K8s Node node-a1 is selected for the Multi-cluster Gateway, run the following command to annotate the Node with: multicluster.antrea.io/gateway=true (so Antrea can know it is the Gateway Node from the annotation):

$kubectl annotate node node-a1 multicluster.antrea.io/gateway=true

Set up Cluster B

Let us switch to cluster B. All the kubectl commands in the following steps should be run with the kubeconfig for cluster B.

Step 1 - deploy Antrea Multi-cluster Controller for member

Run the following command to deploy the member Multi-cluster Controller into Namespace kube-system.

$kubectl apply -f https://github.com/antrea-io/antrea/releases/download/$TAG/antrea-multicluster-member.yml

You can run the following command to verify the antrea-mc-controller Pod is deployed and running:

$kubectl get all -A -l="component=antrea-mc-controller"
NAMESPACE             NAME                                        READY   STATUS    RESTARTS   AGE
kube-system           pod/antrea-mc-controller-85dbf58b75-pjj48   1/1     Running   0          40s

NAMESPACE             NAME                                   READY   UP-TO-DATE   AVAILABLE   AGE
kube-system           deployment.apps/antrea-mc-controller   1/1     1            1           40s

Step 2 - initialize ClusterSet

Run the following commands to make cluster B join the ClusterSet:

$kubectl apply -f leader-access-token.yml
$curl -L https://raw.githubusercontent.com/antrea-io/antrea/$TAG/multicluster/config/samples/clusterset_init/multicluster_membercluster_template.yaml  > multicluster_membercluster.yaml
$sed -e 's/<LEADER_CLUSTER_IP>/172.10.0.11/g' multicluster_membercluster.yaml | kubectl apply -f -

leader-access-token.yml saves the leader cluster ServiceAccount token which was generated when initializing the ClusterSet in cluster A.

Step 3 - specify Multi-cluster Gateway Node

Assuming K8s Node node-b1 is chosen to be the Multi-cluster Gateway for cluster B, run the following command to annotate the Node:

$kubectl annotate node node-b1 multicluster.antrea.io/gateway=true

What is Next

So far, we set up an Antrea Multi-cluster ClusterSet with two clusters following the above sections of this guide. Next, you can start to consume the Antrea Multi-cluster features with the ClusterSet, including Multi-cluster Services and ClusterNetworkPolicy Replication. Please check the relevant Antrea Multi-cluster User Guide sections to learn more.

If you want to add a new member cluster to your ClusterSet, you can follow the steps for cluster B to do so. But note, you will need the following two changes:

  1. You need to add the new mumber cluster to the ClusterSet in the leader cluster (cluster A). You can do that by adding the cluster ID of the new member to multicluster_clusterset_template.yaml and re-applying the manifest in cluster A.

  2. You need to update the member cluster ID in multicluster_membercluster_template.yaml to the cluster ID of the new member cluster in the step 2 of initializing ClusterSet. For example, you can run the following commands to initialize the ClusterSet for a member cluster with ID test-cluster-member2:

$kubectl apply -f leader-access-token.yml
$curl -L https://raw.githubusercontent.com/antrea-io/antrea/$TAG/multicluster/config/samples/clusterset_init/multicluster_membercluster_template.yaml  > multicluster_membercluster.yaml
$sed -e 's/<LEADER_CLUSTER_IP>/172.10.0.11/g' -e 's/test-cluster-member/test-cluster-member2/g' multicluster_membercluster.yaml | kubectl apply -f -

Getting Started

To help you get started, see the documentation.