Logo

Documentation

Introduction

Cloud Deployment

Reference

Windows

Integrations

Cookbooks

Multicluster

Developer Guide

Project Information

Egress

Table of Contents

What is Egress?

Egress is a CRD API that manages external access from the Pods in a cluster. It supports specifying which egress (SNAT) IP the traffic from the selected Pods to the external network should use. When a selected Pod accesses the external network, the egress traffic will be tunneled to the Node that hosts the egress IP if it’s different from the Node that the Pod runs on and will be SNATed to the egress IP when leaving that Node.

You may be interested in using this capability if any of the following apply:

  • A consistent IP address is desired when specific Pods connect to services outside of the cluster, for source tracing in audit logs, or for filtering by source IP in external firewall, etc.

  • You want to force outgoing external connections to leave the cluster via certain Nodes, for security controls, or due to network topology restrictions.

This guide demonstrates how to configure Egress to achieve the above result.

Prerequisites

Egress was introduced in v1.0 as an alpha feature, and was graduated to beta in v1.6, at which time it was enabled by default. Prior to v1.6, a feature gate, Egress must be enabled on the antrea-controller and antrea-agent in the antrea-config ConfigMap like the following options for the feature to work:

apiVersion: v1
kind: ConfigMap
metadata:
  name: antrea-config
  namespace: kube-system
data:
  antrea-agent.conf: |
    featureGates:
      Egress: true    
  antrea-controller.conf: |
    featureGates:
      Egress: true

The Egress resource

A typical Egress resource example:

apiVersion: crd.antrea.io/v1beta1
kind: Egress
metadata:
  name: egress-prod-web
spec:
  appliedTo:
    namespaceSelector:
      matchLabels:
        env: prod
    podSelector:
      matchLabels:
        role: web
  egressIP: 10.10.0.8 # can be populated by Antrea after assigning an IP from the pool below
  externalIPPool: prod-external-ip-pool
status:
  egressNode: node01

AppliedTo

The appliedTo field specifies the grouping criteria of Pods to which the Egress applies to. Pods can be selected cluster-wide using podSelector. If set with a namespaceSelector, all Pods from Namespaces selected by the namespaceSelector will be selected. Specific Pods from specific Namespaces can be selected by providing both a podSelector and a namespaceSelector. Empty appliedTo selects nothing. The field is mandatory.

EgressIP

The egressIP field specifies the egress (SNAT) IP the traffic from the selected Pods to the external network should use. The IP must be reachable from all Nodes. The IP can be specified when creating the Egress. Starting with Antrea v1.2, it can be allocated from an ExternalIPPool automatically.

  • If egressIP is not specified, externalIPPool must be specified. An IP will be allocated from the pool by the antrea-controller. The IP will be assigned to a Node selected by the nodeSelector of the externalIPPool automatically.
  • If both egressIP and externalIPPool are specified, the IP must be in the range of the pool. Similarly, the IP will be assigned to a Node selected by the externalIPPool automatically.
  • If only egressIP is specified, Antrea will not manage the assignment of the IP and it must be assigned to an arbitrary interface of one Node manually.

Starting with Antrea v1.2, high availability is provided automatically when the egressIP is allocated from an externalIPPool, i.e. when the externalIPPool is specified. If the Node hosting the egressIP fails, another Node will be elected (from among the remaining Nodes selected by the nodeSelector of the externalIPPool) as the new egress Node of this Egress. It will take over the IP and send layer 2 advertisement (for example, Gratuitous ARP for IPv4) to notify the other hosts and routers on the network that the MAC address associated with the IP has changed.

Note: If more than one Egress applies to a Pod and they specify different egressIP, the effective egress IP will be selected randomly.

ExternalIPPool

The externalIPPool field specifies the name of the ExternalIPPool that the egressIP should be allocated from. It also determines which Nodes the IP can be assigned to. It can be empty, which means users should assign the egressIP to one Node manually.

Bandwidth

The bandwidth field enables traffic shaping for an Egress, by limiting the bandwidth for all egress traffic belonging to this Egress. rate specifies the maximum transmission rate. burst specifies the maximum burst size when traffic exceeds the rate. The user-provided values for rate and burst must follow the Kubernetes Quantity format, e.g. 300k, 100M, 2G. All backend workloads selected by a rate-limited Egress share the same bandwidth while sending egress traffic via this Egress. If these limits are exceeded, the traffic will be dropped.

Note: Traffic shaping is currently in alpha version. To use this feature, users should enable the EgressTrafficShaping feature gate. Each Egress IP can be applied one bandwidth only. If multiple Egresses use the same IP but configure different bandwidths, the effective bandwidth will be selected randomly from the set of configured bandwidths. The effective use of the bandwidth function requires the OVS datapath to support meters.

An Egress with traffic shaping example:

apiVersion: crd.antrea.io/v1beta1
kind: Egress
metadata:
  name: egress-prod-web
spec:
  appliedTo:
    namespaceSelector:
      matchLabels:
        env: prod
    podSelector:
      matchLabels:
        role: web
  egressIP: 10.10.0.8
  bandwidth:
    rate: 800M
    burst: 2G
status:
  egressNode: node01

The ExternalIPPool resource

ExternalIPPool defines one or multiple IP ranges that can be used in the external network. The IPs in the pool can be allocated to the Egress resources as the Egress IPs. A typical ExternalIPPool resource example:

apiVersion: crd.antrea.io/v1beta1
kind: ExternalIPPool
metadata:
  name: prod-external-ip-pool
spec:
  ipRanges:
  - start: 10.10.0.2
    end: 10.10.0.10
  - cidr: 10.10.1.0/28
  nodeSelector:
    matchLabels:
      network-role: egress-gateway

IPRanges

The ipRanges field contains a list of IP ranges representing the available IPs of this IP pool. Each IP range may consist of a cidr or a pair of start and end IPs (which are themselves included in the range).

SubnetInfo

By default, it’s assumed that the IPs allocated from an ExternalIPPool are in the same subnet as the Node IPs. Starting with Antrea v1.15, IPs can be allocated from a subnet different from the Node IPs.

The optional subnetInfo field contains the subnet attributes of the IPs in this pool. When using a different subnet:

  • gateway and prefixLength must be set. Antrea will route Egress traffic to the specified gateway when the destination is not in the same subnet of the Egress IP, otherwise route it to the destination directly.

  • Optionally, you can specify vlan if the underlying network is expecting it. Once set, Antrea will tag Egress traffic leaving the Egress Node with the specified VLAN ID. Correspondingly, it’s expected that reply traffic towards these Egress IPs is also tagged with the specified VLAN ID when arriving at the Egress Node.

An example of ExternalIPPool using a non-default subnet is as below:

apiVersion: crd.antrea.io/v1beta1
kind: ExternalIPPool
metadata:
  name: prod-external-ip-pool
spec:
  ipRanges:
  - start: 10.10.0.2
    end: 10.10.0.10
  subnetInfo:
    gateway: 10.10.0.1
    prefixLength: 24
    vlan: 10
  nodeSelector:
    matchLabels:
      network-role: egress-gateway

Note: Specifying different subnets is currently in alpha version. To use this feature, users should enable the EgressSeparateSubnet feature gate. Currently, the maximum number of different subnets that can be supported in a cluster is 20, which should be sufficient for most cases. If you need to have more subnets, please raise an issue with your use case, and we will consider revising the limit based on that.

NodeSelector

The nodeSelector field specifies which Nodes the IPs in this pool can be assigned to. It’s useful when you want to limit egress traffic to certain Nodes. The semantics of the selector is the same as those used elsewhere in Kubernetes, i.e. both matchLabels and matchExpressions are supported. It can be empty, which means all Nodes can be selected.

Usage examples

Configuring High-Availability Egress

In this example, we will make web apps in different namespaces use different egress IPs to access the external network.

First, create an ExternalIPPool with a list of external routable IPs on the network.

apiVersion: crd.antrea.io/v1beta1
kind: ExternalIPPool
metadata:
  name: external-ip-pool
spec:
  ipRanges:
  - start: 10.10.0.11  # 10.10.0.11-10.10.0.20 can be used as Egress IPs
    end: 10.10.0.20
  nodeSelector: {}     # All Nodes can be Egress Nodes

Then create two Egress resources, each of which applies to web apps in one Namespace.

apiVersion: crd.antrea.io/v1beta1
kind: Egress
metadata:
  name: egress-prod-web
spec:
  appliedTo:
    namespaceSelector:
      matchLabels:
        kubernetes.io/metadata.name: prod
    podSelector:
      matchLabels:
        app: web
  externalIPPool: external-ip-pool
---
apiVersion: crd.antrea.io/v1beta1
kind: Egress
metadata:
  name: egress-staging-web
spec:
  appliedTo:
    namespaceSelector:
      matchLabels:
        kubernetes.io/metadata.name: staging
    podSelector:
      matchLabels:
        app: web
  externalIPPool: external-ip-pool

List the Egress resource with kubectl. The output shows each Egress gets one IP from the IP pool and gets one Node assigned as its Egress Node.

# kubectl get egress
NAME                 EGRESSIP       AGE   NODE
egress-prod-web      10.10.0.11     1m    node-4
egress-staging-web   10.10.0.12     1m    node-6

Now, the packets from the Pods with label app=web in the prod Namespace to the external network will be redirected to the node-4 Node and SNATed to 10.10.0.11 while the packets from the Pods with label app=web in the staging Namespace to the external network will be redirected to the node-6 Node and SNATed to 10.10.0.12.

Finally, if the node-4 Node powers off, 10.10.0.11 will be re-assigned to another available Node quickly, and the packets from the Pods with label app=web in the prod Namespace will be redirected to the new Node, minimizing egress connection disruption without manual intervention.

Configuring static Egress

In this example, we will make Pods in different namespaces use specific Node IPs (or any IPs that are configured to the interfaces of the Nodes) to access the external network.

Since the Egress IPs have been configured to the Nodes, we can create Egress resources with specific IPs directly.

apiVersion: crd.antrea.io/v1beta1
kind: Egress
metadata:
  name: egress-prod
spec:
  appliedTo:
    namespaceSelector:
      matchLabels:
        kubernetes.io/metadata.name: prod
  egressIP: 10.10.0.104   # node-4's IP
---
apiVersion: crd.antrea.io/v1beta1
kind: Egress
metadata:
  name: egress-staging
spec:
  appliedTo:
    namespaceSelector:
      matchLabels:
        kubernetes.io/metadata.name: staging
  egressIP: 10.10.0.105   # node-5's IP

List the Egress resource with kubectl. The output shows 10.10.0.104 is discovered on node-4 Node while 10.10.0.105 is discovered on node-5.

# kubectl get egress
NAME                 EGRESSIP       AGE   NODE
egress-prod          10.10.0.104    1m    node-4
egress-staging       10.10.0.105    1m    node-5

Now, the packets from the Pods with in the prod Namespace to the external network will be redirected to the node-4 Node and SNATed to 10.10.0.104 while the packets from the Pods in the staging Namespace to the external network will be redirected to the node-5 Node and SNATed to 10.10.0.105.

In this configuration, if the node-4 Node powers off, re-configuring 10.10.0.104 to another Node or updating the egressIP of egress-prod to another Node’s IP can recover the egress connection. Antrea will detect the configuration change and redirect the packets from the Pods in the prod Namespace to the new Node.

Configuration options

There are several options that can be configured for Egress according to your case.

  • egress.exceptCIDRs - The CIDR ranges to which outbound Pod traffic will not be SNAT’d by Egresses. The option was added in Antrea v1.4.0.
  • egress.maxEgressIPsPerNode - The maximum number of Egress IPs that can be assigned to a Node. It’s useful when the Node network restricts the number of secondary IPs a Node can have, e.g. in AWS EC2. The configured value must not be greater than 255. The restriction applies to all Nodes in the cluster. If you want to set different capacities for Nodes, the node.antrea.io/max-egress-ips annotation of Node objects can be used to specify different values for different Nodes, taking priority over the value configured in the config file. The option and the annotation were added in Antrea v1.11.0.

Egress on Cloud

High-Availability Egress requires the Egress IPs to be able to float across Nodes. When assigning an Egress IP to a Node, Antrea assumes the responsibility of advertising the Egress IPs to the Node network via the ARP or NDP protocols. However, cloud networks usually apply SpoofGuard which prevents the Nodes from using any IP that is not configured for them in the cloud’s control plane, or even don’t support multicast and broadcast. These restrictions lead to High-Availability Egress not being as readily available on some clouds as it is on on-premise networks, and some custom (i.e., cloud-specific) work is required in the cloud’s control plane to assign the Egress IP as secondary Node IPs.

AWS

In Amazon VPC, ARP packets never hit the network, and traffic with Egress IP as source IP or destination IP isn’t transmitted arbitrarily unless they are explicitly authorized (check AWS VPC Whitepaper for more information). To authorize an Egress IP, it must be configured as the secondary IP of the primary network interface of the Egress Node instance. You can refer to the AWS doc to assign a secondary IP to a network interface.

If you are using static Egress and managing the assignment of Egress IPs yourself: you should ensure the Egress IP is assigned as one of the IP addresses of the primary network interface of the Egress Node instance via Amazon EC2 console or AWS CLI.

If you are using High-Availability Egress and let Antrea manage the assignment of Egress IPs: at the moment Antrea can only assign the Egress IP to an Egress Node at the operating system level (i.e., add the IP to the interface), and you still need to ensure the Egress IP is assigned to the Node instance via Amazon EC2 console or AWS CLI. To automate it, you can build a Kubernetes Operator which watches the Egress API, gets the Egress IP and the Egress Node from the status fields, and configures the Egress IP as the secondary IP of the primary network interface of the Egress Node instance via the AssignPrivateIpAddresses API.

Limitations

This feature is currently only supported for Nodes running Linux and “encap” mode. The support for Windows and other traffic modes will be added in the future.

The previous implementation of Antrea Egress before Antrea v1.7.0 does not work with the strictARP configuration of kube-proxy IPVS mode. The strictARP configuration is required by some Service load balancing solutions including: Antrea Service external IP management, MetalLB, and kube-vip. It means Antrea Egress cannot work together with these solutions in a cluster using kube-proxy IPVS. The issue was fixed in Antrea v1.7.0.

Getting Started

To help you get started, see the documentation.

Documentation