Logo

Documentation

External Node

Table of Contents

What is ExternalNode?

ExternalNode is a CRD API that enables Antrea to manage the network connectivity and security on a Non-Kubernetes Node (like a virtual machine or a bare-metal server). It supports specifying which network interfaces on the external Node are expected to be protected with Antrea NetworkPolicy rules. The virtual machine or bare-metal server represented by an ExternalNode resource can be either Linux or Windows. “External Node” will be used to designate such a virtual machine or bare-metal server in the rest of this document.

Antrea NetworkPolicies are applied to an external Node by leveraging the ExternalEntity resource. antrea-controller creates an ExternalEntity resource for each network interface specified in the ExternalNode resource.

antrea-agent is running on the external Node, and it controls network connectivity and security by attaching the network interface(s) to an OVS bridge. A new OpenFlow pipeline has been implemented, dedicated to the ExternalNode feature.

You may be interested in using this capability for the below scenarios:

  • To apply Antrea NetworkPolicy to an external Node.
  • You want the same security configurations on the external Node for all Operating Systems.

This guide demonstrates how to configure ExternalNode to achieve the above result.

Prerequisites

ExternalNode is introduced in v1.8 as an alpha feature. The feature gate ExternalNode must be enabled in the antrea-controller and antrea-agent configuration. The configuration for antrea-controller is modified in the antrea-config ConfigMap as follows for the feature to work:

apiVersion: v1
kind: ConfigMap
metadata:
  name: antrea-config-dcfb6k2hkm
  namespace: kube-system
data:
  antrea-controller.conf: |
    featureGates:
      ExternalNode: true    

The antrea-controller implements the antrea Service, which accepts connections from each antrea-agent and is an important part of the NetworkPolicy implementation. By default, the antrea Service has type ClusterIP. Because external Nodes run outside of the Kubernetes cluster, they cannot directly access the ClusterIP address. Therefore, the antrea Service needs to become externally-accessible, by changing its type to NodePort or LoadBalancer.

Since antrea-agent is running on an external Node which is not managed by Kubernetes, a configuration file needs to be present on each machine where the antrea-agent is running, and the path to this file will be provided to the antrea-agent as a command-line argument. Refer to the sample configuration to learn theantrea-agent configuration options when running on an external Node.

A further section will provide detailed steps for running the antrea-agent on a VM.

The ExternalNode resource

An example ExternalNode resource:

apiVersion: crd.antrea.io/v1alpha1
kind: ExternalNode
metadata:
  name: vm1
  namespace: vm-ns
  labels:
    role: db
spec:
  interfaces:
    - ips: [ "172.16.100.3" ]
      name: ""

Note: Only one interface is supported for Antrea v1.8.

Name and Namespace

The name field in an ExternalNode uniquely identifies an external Node. The ExternalNode name is provided to antrea-agent via an environment variable NODE_NAME, otherwise antrea-agent will use the hostname to find the ExternalNode resource if NODE_NAME is not set.

ExternalNode resource is Namespace scoped. The Namespace is provided to antrea-agent with option externalNodeNamespace in antrea-agent.conf.

externalNodeNamespace: vm-ns

Interfaces

The interfaces field specifies the list of the network interfaces expected to be guarded by Antrea NetworkPolicy. At least one interface is required. Interface name or ips is used to identify the target interface. The field ips must be provided in the CRD, but name is optional. Multiple IPs on a single interface is supported. In the case that multiple interfaces are configured, name must be specified for every interface.

antrea-controller creates an ExternalEntity for each interface whenever an ExternalNode is created. The created ExternalEntity has the following characteristics:

  • It is configured within the same Namespace as the ExternalNode.
  • The name is generated according to the following principles:
    • Use the ExternalNode name directly, if there is only one interface, and interface name is not specified.
    • Use the format $ExternalNode.name-$hash($interface.name)[:5] for other cases.
  • The externalNode field is set with the ExternalNode name.
  • The owner is referring to the ExternalNode resource.
  • All labels added on ExternalNode are copied to the ExternalEntity.
  • Each IP address of the interface is added as an endpoint in the endpoints list, and the interface name is used as the endpoint name if it is set.

The ExternalEntity resource created for the above ExternalNode interface would look like this:

apiVersion: crd.antrea.io/v1alpha2
kind: ExternalEntity
metadata:
  labels:
    role: db
  name: vm1
  namespace: vm-ns
  ownerReferences:
    - apiVersion: v1alpha1
      kind: ExternalNode
      name: vm1
      uid: 99b09671-72da-4c64-be93-17185e9781a5
  resourceVersion: "5513"
  uid: 5f360f32-7806-4d2d-9f36-80ce7db8de10
spec:
  endpoints:
    - ip: 172.16.100.3
  externalNode: vm1

Install Antrea Agent on VM

Prerequisites on Kubernetes cluster

  1. Enable ExternalNode feature on the antrea-controller, and expose the antrea Service externally (e.g., as a NodePort Service).

  2. Create a Namespace for antrea-agent. This document will use vm-ns as an example Namespace for illustration.

    kubectl create ns vm-ns
    
  3. Create a ServiceAccount, ClusterRole and ClusterRoleBinding for antrea-agent as shown below. If you use a Namespace other than vm-ns, you need to update the VM RBAC manifest and change vm-ns to the right Namespace.

    kubectl apply -f https://raw.githubusercontent.com/antrea-io/antrea/main/build/yamls/externalnode/vm-agent-rbac.yml
    
  4. Create antrea-agent.kubeconfig file for antrea-agent to access the K8S API server.

    CLUSTER_NAME="kubernetes"
    SERVICE_ACCOUNT="vm-agent"
    NAMESPACE="vm-ns"
    KUBECONFIG="antrea-agent.kubeconfig"
    APISERVER=$(kubectl config view -o jsonpath="{.clusters[?(@.name==\"$CLUSTER_NAME\")].cluster.server}")
    TOKEN=$(kubectl -n $NAMESPACE get secrets -o jsonpath="{.items[?(@.metadata.name=='${SERVICE_ACCOUNT}-service-account-token')].data.token}"|base64 --decode)
    kubectl config --kubeconfig=$KUBECONFIG set-cluster $CLUSTER_NAME --server=$APISERVER --insecure-skip-tls-verify=true
    kubectl config --kubeconfig=$KUBECONFIG set-credentials antrea-agent --token=$TOKEN
    kubectl config --kubeconfig=$KUBECONFIG set-context antrea-agent@$CLUSTER_NAME --cluster=$CLUSTER_NAME --user=antrea-agent
    kubectl config --kubeconfig=$KUBECONFIG use-context antrea-agent@$CLUSTER_NAME
    # Copy antrea-agent.kubeconfig to the VM
    
  5. Create antrea-agent.antrea.kubeconfig file for antrea-agent to access the antrea-controller API server.

    # Specify the antrea-controller API server endpoint. Antrea-Controller needs
    # to be exposed via the Node IP or a public IP that is reachable from the VM
    ANTREA_API_SERVER="https://172.18.0.1:443"
    ANTREA_CLUSTER_NAME="antrea"
    NAMESPACE="vm-ns"
    KUBECONFIG="antrea-agent.antrea.kubeconfig"
    TOKEN=$(kubectl -n $NAMESPACE get secrets -o jsonpath="{.items[?(@.metadata.name=='${SERVICE_ACCOUNT}-service-account-token')].data.token}"|base64 --decode)
    kubectl config --kubeconfig=$KUBECONFIG set-cluster $ANTREA_CLUSTER_NAME --server=$ANTREA_API_SERVER --insecure-skip-tls-verify=true
    kubectl config --kubeconfig=$KUBECONFIG set-credentials antrea-agent --token=$TOKEN
    kubectl config --kubeconfig=$KUBECONFIG set-context antrea-agent@$ANTREA_CLUSTER_NAME --cluster=$ANTREA_CLUSTER_NAME --user=antrea-agent
    kubectl config --kubeconfig=$KUBECONFIG use-context antrea-agent@$ANTREA_CLUSTER_NAME
    # Copy antrea-agent.antrea.kubeconfig to the VM
    
  6. Create an ExternalNode resource for the VM.

    After preparing the ExternalNode configuration yaml for the VM, we can apply it in the cluster.

    cat << EOF | kubectl apply -f -
    apiVersion: crd.antrea.io/v1alpha1
    kind: ExternalNode
    metadata:
      name: vm1
      namespace: vm-ns
      labels:
        role: db
    spec:
      interfaces:
        - ips: [ "172.16.100.3" ]
          name: ""
    EOF
    

Installation on Linux VM

Prerequisites on Linux VM

OVS needs to be installed on the VM. For more information about OVS installation please refer to the getting-started guide.

Installation steps on Linux VM

Antrea Agent can be installed as a native service or can be installed in a container.

Service Installation
  1. Build antrea-agent binary in the root of the Antrea code tree and copy the antrea-agent binary from the bin directory to the Linux VM.

    make docker-bin
    
  2. Copy configuration files to the VM, including antrea-agent.conf, which specifies agent configuration parameters; antrea-agent.antrea.kubeconfig and antrea-agent.kubeconfig, which were generated in steps 4 and 5 of Prerequisites on Kubernetes cluster.

  3. Bootstrap antrea-agent using one of these 2 methods:

    1. Bootstrap antrea-agent using the installation script as shown below (Ubuntu 18.04 and 20.04, and Red Hat Enterprise Linux 8.4).

      ./install-vm.sh --ns vm-ns --bin ./antrea-agent --config ./antrea-agent.conf \
      --kubeconfig ./antrea-agent.kubeconfig \
      --antrea-kubeconfig ./antrea-agent.antrea.kubeconfig --nodename vm1
      
    2. Bootstrap antrea-agent manually. First edit the antrea-agent.conf file to set clientConnection, antreaClientConnection and externalNodeNamespace to the correct values.

      AGENT_NAMESPACE="vm-ns"
      AGENT_CONF_PATH="/etc/antrea"
      mkdir -p $AGENT_CONF_PATH
      # Copy antrea-agent kubeconfig files
      cp ./antrea-agent.kubeconfig $AGENT_CONF_PATH
      cp ./antrea-agent.antrea.kubeconfig $AGENT_CONF_PATH
      # Update clientConnection and antreaClientConnection
      sed -i "s|kubeconfig: |kubeconfig: $AGENT_CONF_PATH/|g" antrea-agent.conf
      sed -i "s|#externalNodeNamespace: default|externalNodeNamespace: $AGENT_NAMESPACE|g" antrea-agent.conf
      # Copy antrea-agent configuration file
      cp ./antrea-agent.conf $AGENT_CONF_PATH
      

      Then create antrea-agent service. Below is a sample snippet to start antrea-agent as a service on Ubuntu 18.04 or later:

      Note: Environment variable NODE_NAME needs to be set in the service configuration, if the VM’s hostname is different from the name defined in the ExternalNode resource.

      AGENT_BIN_PATH="/usr/sbin"
      AGENT_LOG_PATH="/var/log/antrea"
      mkdir -p $AGENT_BIN_PATH
      mkdir -p $AGENT_LOG_PATH
      cat << EOF > /etc/systemd/system/antrea-agent.service
      Description="antrea-agent as a systemd service"
      After=network.target
      [Service]
      Environment="NODE_NAME=vm1"
      ExecStart=$AGENT_BIN_PATH/antrea-agent \
      --config=$AGENT_CONF_PATH/antrea-agent.conf \
      --logtostderr=false \
      --log_file=$AGENT_LOG_PATH/antrea-agent.log
      Restart=on-failure
      [Install]
      WantedBy=multi-user.target
      EOF
      
      sudo systemctl daemon-reload
      sudo systemctl enable antrea-agent
      sudo systemctl start antrea-agent
      
Container Installation
  1. Docker is used as the container runtime for Linux VMs. The Docker image can be built from source code or can be downloaded from the Antrea repository.

    1. From Source

      Build antrea-ubuntu Docker image in the root of the Antrea code tree.

      make
      

      Note: The image repository name should be antrea/antrea-ubuntu and tag should be latest.

      Copy the antrea/antrea-ubuntu:latest image to the target VM. Please follow the below steps.

      # Save it in a tar file
      docker save -o <tar file path in source host machine> antrea/antrea-ubuntu:latest
      
      # Copy this tar file to the target VM.
      # Then load that image on the target VM.
      docker load -i <path to image tar file>
      
    2. Docker Repository

      The released version of antrea-ubuntu Docker image can be downloaded from Antrea Dockerhub repository. Pick a version from the list of releases. For any given release <TAG> (e.g. v1.9.0), download antrea-ubuntu Docker image as follows:

      docker pull antrea/antrea-ubuntu:<TAG>
      

      The installation script automatically downloads the specific released version of antrea-ubuntu Docker image on VM by specifying the installation argument --antrea-version. Also, the script automatically loads that image into Docker. For any given release <TAG> (e.g. v1.9.0), specify it in the –antrea-version argument as follows.

         --antrea-version <TAG>
      
  2. Copy configuration files to the VM, including antrea-agent.conf, which specifies agent configuration parameters; antrea-agent.antrea.kubeconfig and antrea-agent.kubeconfig, which were generated in steps 4 and 5 of Prerequisites on Kubernetes cluster.

  3. Bootstrap antrea-agent using the installation script as shown below (Ubuntu 18.04, 20.04, and Rhel 8.4).

      ./install-vm.sh --ns vm-ns --config ./antrea-agent.conf \
      --kubeconfig ./antrea-agent.kubeconfig \
      --antrea-kubeconfig ./antrea-agent.antrea.kubeconfig --containerize --antrea-version v1.9.0
    

Installation on Windows VM

Prerequisites on Windows VM

  1. Enable the Windows Hyper-V optional feature on Windows VM.

    Install-WindowsFeature Hyper-V-Powershell
    Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V -All -NoRestart
    
  2. OVS needs to be installed on the VM. For more information about OVS installation please refer to the Antrea Windows documentation.

  3. Download nssm which will be used to create the Windows service for antrea-agent.

Note: Only Windows Server 2019 is supported in the first release at the moment.

Installation steps on Windows VM

  1. Build antrea-agent binary in the root of the antrea code tree and copy the antrea-agent binary from the bin directory to the Windows VM.

    #! /bin/bash
    make docker-windows-bin
    
  2. Copy antrea-agent.conf, antrea-agent.kubeconfig and antrea-agent.antrea.kubeconfig files to the VM. Please refer to the step 2 of Installation on Linux VM section for more information.

    $WIN_AGENT_CONF_PATH="C:\antrea-agent\conf"
    New-Item -ItemType Directory -Force -Path $WIN_AGENT_CONF_PATH
    # Copy antrea-agent kubeconfig files
    Copy-Item .\antrea-agent.kubeconfig $WIN_AGENT_CONF_PATH
    Copy-Item .\antrea-agent.antrea.kubeconfig $WIN_AGENT_CONF_PATH
    # Copy antrea-agent configuration file
    Copy-Item .\antrea-agent.conf $WIN_AGENT_CONF_PATH
    
  3. Bootstrap antrea-agent using one of these 2 methods:

    1. Bootstrap antrea-agent using the installation script as shown below (only Windows Server 2019 is tested and supported).

      .\Install-vm.ps1 -Namespace vm-ns -BinaryPath .\antrea-agent.exe `
      -ConfigPath .\antrea-agent.conf -KubeConfigPath .\antrea-agent.kubeconfig `
      -AntreaKubeConfigPath .\antrea-agent.antrea.kubeconfig `
      -InstallDir C:\antrea-agent -NodeName vm1
      
    2. Bootstrap antrea-agent manually. First edit the antrea-agent.conf file to set clientConnection, antreaClientConnection and externalNodeNamespace to the correct values. Configure environment variable NODE_NAME if the VM’s hostname is different from the name defined in the ExternalNode resource.

      [Environment]::SetEnvironmentVariable("NODE_NAME", "vm1")
      [Environment]::SetEnvironmentVariable("NODE_NAME", "vm1", [System.EnvironmentVariableTarget]::Machine)
      

      Then create antrea-agent service using nssm. Below is a sample snippet to start antrea-agent as a service:

      $WIN_AGENT_BIN_PATH="C:\antrea-agent"
      $WIN_AGENT_LOG_PATH="C:\antrea-agent\logs"
      New-Item -ItemType Directory -Force -Path $WIN_AGENT_BIN_PATH
      New-Item -ItemType Directory -Force -Path $WIN_AGENT_LOG_PATH
      Copy-Item .\antrea-agent.exe $WIN_AGENT_BIN_PATH
      nssm.exe install antrea-agent $WIN_AGENT_BIN_PATH\antrea-agent.exe --config $WIN_AGENT_CONF_PATH\antrea-agent.conf --log_file $WIN_AGENT_LOG_PATH\antrea-agent.log --logtostderr=false
      nssm.exe start antrea-agent
      

VM network configuration

antrea-agent uses the interface IPs or name to find the network interface on the external Node, and then attaches it to the OVS bridge. The network interface is attached to OVS as uplink, and a new OVS internal Port is created to take over the uplink interface’s IP/MAC and routing configurations. On Windows, the DNS configurations are also moved to the OVS internal port from uplink. Before attaching the uplink to OVS, the network interface is renamed with a suffix “~”, and OVS internal port is configured with the original name of the uplink. As a result, IP/MAC/routing entries are seen on a network interface configuring with the same name on the external Node.

The outbound traffic sent from the external Node enters OVS from the internal port, and finally output from the uplink, and the inbound traffic enters OVS from the uplink and output to the internal port. The IP packet is processed by the OpenFlow pipeline, and the non-IP packet is forwarded directly.

The following diagram depicts the OVS bridge and traffic forwarding on an external Node:

Traffic On ExternalNode

RBAC for antrea-agent

An external Node is regarded as an untrusted entity on the network. To follow the least privilege principle, the RBAC configuration for antrea-agent running on an external Node is as follows:

  • Only get, list and watch permissions are given on resource ExternalNode
  • Only update permission is given on resource antreaagentinfos, and create permission is moved to antrea-controller

For more details please refer to vm-agent-rbac.yml

antrea-agent reports its status by updating the antreaagentinfo resource which is created with the same name as the ExternalNode. antrea-controller creates an antreaagentinfo resource for each new ExternalNode, and then antrea-agent updates it every minute with its latest status. antreaagentinfo is deleted by antrea-controller when the ExternalNode is deleted.

Apply Antrea NetworkPolicy to ExternalNode

Antrea NetworkPolicy configuration

An Antrea NetworkPolicy is applied to an ExternalNode by providing an externalEntitySelector in the appliedTo field. The ExternalEntity resource is automatically created for each interface of an ExternalNode. ExternalEntity resources are used by antrea-controller to process the NetworkPolicies, and each antrea-agent (including those running on external Nodes) receives the appropriate internal AntreaNetworkPolicy objects.

Following types of (from/to) network peers are supported in an Antrea NetworkPolicy applied to an external Node:

  • ExternalEntities selected by an externalEntitySelector
  • An ipBlock
  • A FQDN address in an egress rule

Following actions are supported in an Antrea NetworkPolicy applied to an external Node:

  • Allow
  • Drop
  • Reject

Below is an example of applying an Antrea NetworkPolicy to the external Nodes labeled with role=db to reject SSH connections from IP “172.16.100.5” or from other external Nodes labeled with role=front:

kind: NetworkPolicy
metadata:
  name: anp1
  namespace: vm-ns
spec:
  priority: 9000.0
  appliedTo:
    - externalEntitySelector:
        matchLabels:
          role: db
  ingress:
    - action: Reject
      ports:
        - protocol: TCP
          port: 22
      from:
        - externalEntitySelector:
            matchLabels:
              role: front
        - ipBlock:
            cidr: 172.16.100.5/32

Bypass Antrea NetworkPolicy

In some cases, users may want some particular traffic to bypass Antrea NetworkPolicy rules on an external Node, e.g.,the SSH connection from a special host to the external Node. policyBypassRules can be added in the agent configuration to define traffic that needs to bypass NetworkPolicy enforcement. Below is a configuration example:

policyBypassRules:
  - direction: ingress
    protocol: tcp
    cidr: 1.1.1.1/32
    port: 22

The direction can be ingress or egress. The supported protocols include: tcp,udp, icmp and ip. The cidr gives the peer address, which is the destination in an egress rule, and the source in an ingress rule. For tcp and udp protocols, the port is required to specify the destination port.

OpenFlow pipeline

A new OpenFlow pipeline is implemented by antrea-agent dedicated for ExternalNode feature.

OVS pipeline

Non-IP packet

NonIPTable is a new OpenFlow table introduced only on external Nodes, which is dedicated to all non-IP packets. A non-IP packet is forwarded between the pair ports directly, e.g., a non-IP packet entering OVS from the uplink interface is output to the paired internal port, and a packet from the internal port is output to the uplink.

IP packet

A new OpenFlow pipeline is set up on external Nodes to process IP packets. Antrea NetworkPolicy enforcement is the major function in this new pipeline, and the OpenFlow tables used are similar to the Pod pipeline. No L3 routing is provided on an external Node, and a simple L2 forwarding policy is implemented. OVS connection tracking is used to assist the NetworkPolicy function; as a result only the first packet is validated by the OpenFlow entries, and the subsequent packets in an accepted connection are allowed directly.

  • Egress/Ingress Tables

Table XgressSecurityClassifierTable is installed in both stageEgressSecurity and stageIngressSecurity, which is used to install the OpenFlow entries for the policyBypassRules in the agent configuration.

This is an example of the OpenFlow entry for the above configuration:

table=IngressSecurityClassifier, priority=200,ct_state=+new+trk,tcp,nw_src=1.1.1.1,tp_dst=22 actions=resubmit(,IngressMetric)

Other OpenFlow tables in stageEgressSecurity and stageIngressSecurity are the same as those installed on a Kubernetes worker Node. For more details about these tables, please refer to the general introduction of Antrea OVS pipeline.

  • L2 Forwarding Tables

L2ForwardingCalcTable is used to calculate the expected output port of an IP packet. As the pair ports with the internal port and uplink always exist on the OVS bridge, and both interfaces are configured with the same MAC address, the match condition of an OpenFlow entry in L2ForwardingCalcTable uses the input port number but not the MAC address of the packet. The flow actions are:

  1. set flag OFPortFoundRegMark, and
  2. set the peer port as the TargetOFPortField, and
  3. enforce the packet to go to stageIngressSecurity.

Below is an example OpenFlow entry in L2ForwardingCalcTable

table=L2ForwardingCalc, priority=200,ip,in_port=ens224 actions=load:0x1->NXM_NX_REG0[8],load:0x7->NXM_NX_REG1[],resubmit(,IngressSecurityClassifier)
table=L2ForwardingCalc, priority=200,ip,in_port="ens224~" actions=load:0x1->NXM_NX_REG0[8],load:0x8->NXM_NX_REG1[],resubmit(,IngressSecurityClassifier)

Limitations

This feature currently supports only one interface per ExternalNode object, and ips must be set in the interface. The support for multiple network interfaces will be added in the future.

ExternalNode name must be unique in the cluster scope even though it is itself a Namespaced resource.

Getting Started

To help you get started, see the documentation.